PRG is announcing an interim software release of both FEPipe v10.1 and NozzlePRO v12.1.

PRG is announcing an interim software release (in the middle of two major versions) of both FEPipe v10.1 and NozzlePRO v12.1.

Details pertaining to the interim release can be found in the attached document.

InterimRelease2018-FP101-NP121

 

Who is eligible for the Interim Release?

Clients who were eligible for FEPipe v10.0 and NozzlePRO v12.0 are eligible to receive this interim release – even if their SMS has since expired.

When is the next major release?

The next major release of FEPipe v10.5 and NozzlePRO v12.5 is scheduled for Q1 2019.  In order for clients to be eligible for this version they will have to have an active support agreement at that time.  Some of the upcoming features can be found on the attached PDF.

 

If you have any questions about this interim release, please send those questions to Ryan Metcalf at PAULIN Research Group (ryan@paulin.com) or directly to sales@paulin.com to be answered.

 

Best Regards,

Mary Jane Paulin-Metcalf

maryjane@paulin.com

 

Veröffentlicht unter news

PRG-2018 New Version Release of both NozzlePRO and FEPipe

PRG-2018 New Version Release of both NozzlePRO and FEPipe

PAULIN Research Group is pleased to announce the release of FEPipe version 10.0 and NozzlePRO version 12.0.

If you are a customer that is current on support, or had your support expire AFTER April 15, 2017, you have the right to download and use the version of your Licensed program. If your support expired BEFORE April 15, 2017, please send an email to sales@paulin.com to get a support reinstatement quote.

To request a link to the latest installer please contact softwaredownload@paulin.com and provide the following information:

  • Your Name & Email Address
  • Company Name
  • Your PRG Product Serial Number (NP-nnnnn or FP-nnnnn)

Please note that the download file is fairly large.  Download times will vary between 3 – 30 minutes, depending on traffic, location and connection speed.

Only clients with valid Software Maintenance & Service (SMS) as of 15 April 2017, and whose accounts are in good standing, will be eligible to receive the new version.  As always, SMS-dependent modules are only activated for clients with active SMS.

Here is a brief summary of the new major features we think will be of interest to most customers.

GENERAL FEATURES – Highlights

  • Support for ASME VIII-2 Part 5 Nonlinear Analysis Features (FEPipe, NozzlePRO)
  • New Drawing Tools (FEPipe, NozzlePRO)
  • Interactive Output Processing – MiMOut (FEPipe, NozzlePRO)
  • Fitness for Service (FEPipe, NozzlePRO)
  • BOS B31 – New SMS Module (FEPipe)
  • Point Cloud Scanning Software – New SMS Module (FEPipe)

For more detailed information on the software release, you can download our summary document by clicking on the filename here: NewFeaturesFPv10NPv12.pdf.

If you have any questions about the new version release, or the process to get it, please feel free to get in touch with us by sending an email to sales@paulin.com.  Having an email record of your request will help us make sure any questions get addressed by the right group within PRG (sales, support, or development).

Veröffentlicht unter news

Important Industry News – B31J – 2017

Q3 2017 Company Updates & Announcement

Important Industry News – B31J – 2017

The ASME B31 Committees recently officially released the new Standard we refer to as “B31J – 2017”. This officially makes B31J – 2017 available and part of the B.31 Code. This is a fundamental transformation for pressure vessel and piping design, and it will impact virtually every PVP design project in the future. B31J marks the first major improvement in the treatement of SIFs, k-factors, and SSIs in the Code in the last 40+ years. For those who take the time to understand and implement this new approach, more accurate designs, a reduction in costs related to design, construction, and lifecycle maintenance of a plant, and a simultaneous improvement in safety will be possible.

To see a joint Webinar put on between PRG and Intergraph on this subject, on September 6, 2017, please see the following announcement by Intergraph by clicking HERE.

For More information on B31J and FEATools, please click HERE.

Company News – New PRG Product Version Releases –
FEPipe version 10 and NozzlePRO version 12

Paulin Research Group is very close to releasing version 10.0 of FEPipe and version 12.0 of NozzlePRO. We expect to release these versions in mid to late September, 2017. When this major version release is ready for distribution, all of our current and past customers will be notified by email. We will be offering a support reinstatement “special” to give customers a chance to get back and support and then receive this very important update to our products. For a brief summary of the planned new functionality that will be in these releases, click HERE. Also see the Webinars discussed below for presentations by Tony Paulin on the new products and new features in this upcoming major release.

Company News – We will see you at the September 26 CAU Event in Sugarland, TX

Paulin Research Group will be at the September 26, 2017 Intergraph CAU event in Sugarland, TX. We will be sponsoring a booth and a morning coffee break. We would love for you to stop by and ask us questions about FEATools, B31J, BOS B31, our upcoming version releases, or any piping or pressure vessel design questions you may have.

Upcoming Webinar Schedule

The following PRG Webinars and Joint PRG/Intergraph Webinar will be held in the upcoming months to cover both B.31J and the new version releases of NozzlePRO and FEPipe, and related important topics
JOINT WEBINAR – FEATools and B31J Focus – September 6, 2017

September 6, 2017- Joint PRG and Intergraph Webinar on B31J, version 3.1 of FEATools, and version 12 of NozzlePRO – Click HERE to Register

PRG PRODUCT VERSION UPDATE (RELEASE) WEBINARS

October 24 – NozzlePRO version 12.0, new features and functionality –
Registration Links to be sent out and announced in the near future

November 14 – FEPipe version 10.0, new features and functionality –
Registration Links to be sent out and announced in the near future

MISCELLANEOUS FOLLOW-UP WEBINARS ON SPECIFIC PROGRAMS AND TOPICS

September 28 – B31J Coverage with a focus on bends and nozzle connections. BOS B31 –
Registration for this Webinar will be available in the near future

October 17 – ASME Section VIII – Div. 2 Nonlinear Nozzle Design Rules. B31J. Pipe Shoes – Registration for this Webinar will be available in the near future

November 7 – Caesar/FEATools Models – Bends with attachments – Refractory lined bends and branch connections – Commercial Tees – EN103253 Type A,B Olets –
Registration for this Webinar will be available in the near future

December 5 – API-661 and FEA – Thermal gradients on Bends with attachments – BOS B31 and B31.3 Sec. 310.5.1 (pipe geysering and flashing load analysis) –
Registration for this Webinar will be available in the near future

December 10 – BOS B31 features and typical load mechanisms –
Registration for this Webinar will be available in the near future

January 9 – Using point clouds to validate piping systems. Fitness for Service (FFS) calculations using both Linear and Non-Linear methods. –
Registration for this Webinar will be available in the near future

January 30 – Using point clouds in measurement applications – Ke calcs for fatigue in Nozzles –
Registration for this Webinar will be available in the near future

Veröffentlicht unter news

Mrs Jeannine Fuchs is now member of The Worldwide Association of Female Professionals

worldwideassociation

Veröffentlicht unter news

What’s New in CAESAR II 2016?

The new CAESAR II 2016 Version is available.

CAESARII

To see a free webinar about the upcoming changes please click the following link:

http://coade.typepad.com/coadeinsider/2015/09/caesar-ii-2016.html

 

Veröffentlicht unter news

Paulin Research Group 6. Mai 2015 -Präsentation vor einem großen US-Regierungsbehörde

Paulin Research Group May 6, 2015 –

Tony Paulin Jr., Präsident der PRG, gab einen ganzen Tag Vorlesung und Seminar zu den Druck Systems Engineering Manager eines großen US-Regierungsbehörde.

Diese Präsentation zeigt, wie die PRG FEA-Technologie kann verwendet werden, um schnell und einfach zu verbessern, die Sicherheit eines Systems bei gleichzeitiger Reduzierung “over-design”.

Haben Sie Probleme mit einer Komponente, die außerhalb der Grenzen der B31 Codes fällt, WRC-107 oder WRC-297?

Denken Sie, dass die “zulässigen Spannungen” für Ihr Design verdächtig niedrig scheinen?

 PRG Software kann Ihnen helfen!

bild1

Veröffentlicht unter news

ASME Kommitee veröffentlicht Forschungsergebnisse von Tony Paulin, PRG

Anfang des Jahres war es endlich soweit. Das Paper STP-PT-073 – 2014 von Tony Paulin – Paulin Research Group, wurde endlich auf der ASME Homepage veröffentlicht.

Sie können es unter folgendem Link erwerben:

https://www.asme.org/products/codes-standards/stppt073-2014-stress-intensity-factor-kfactor

Getagged mit: , ,
Veröffentlicht unter news

Trainingsseminar für die Spannungsanalyse für Rohrleitungen mit CAESAR II

Sehr geehrter Kunde,

wir freuen uns, Ihnen bekannt zu geben, dass wir jetzt die Genehmigung von Intergraph erhalten haben, Spannungsanalyse- Seminare mit CAESAR II durchführen können.

Kenntnisse über die Funktionen der Software ermöglicht es Ihnen nur, einen neuen Input zu kreieren, aber nicht die Lösungen zu finden, wenn die zulässigen Spannungen überschritten werden.

Unsere Absicht ist es, Kunden in der Zukunft bei den Spannungsanalysen zu helfen, unabhängig welche Software Sie für die Spannungsanalyse einsetzten und Ihr Wissen in diesem Bereich zu verbessern, was wir bereits für FE Programm von Paulin Research Group tun.

 

Wir sind nicht für den Vertrieb von CAESAR II zuständig.

Veröffentlicht unter news

FE/Pipe Training Seminar wird um ein Tag verlängert!

Auf Wunsch unserer Kunden haben wir das Training Seminar von FE / PIPE um einen Tag verlängertsmiley!

Das Training Seminar ist jetzt 2 Tage lang.

Veröffentlicht unter FE/PIPE, news

Hier können Sie sehen, welche Art von Beispielen in der NozzlePro-FE/PIPE Seminar werden gearbeitet

Download (PDF, 1.48MB)

Veröffentlicht unter news